Windows 7 100% Working Activators Provided (Verified) - Fully Updatable
Page 1 of 1
Windows 7 100% Working Activators Provided (Verified) - Fully Updatable
by adj1993 Sat Apr 23, 2011 9:19 am
Windows 7 100% Working Activators Provided (Verified) - Fully Updatable
[You must be registered and logged in to see this image.]
Windows 7 Seven Ultimate Fully Activated For Ever
Size: 3.47 GB
No serial and no activation needed
32/64-bit | Multi Languages | DVD ISO | Bootable | Activated
Install:
– Download and extract using WinRAR.
– Use NERO to burn the ISO image called “faXcooL.Windows.7.Ultimate.ENG.x86-x64.ACTiVATED”
– Burning speed should not be faster than 4x. Otherwise, it might not work.
– Restart your computer.
– Make sure you’ve seleceted your DVD-ROM/RW drive as a first boot device
* Enter the BIOS pressing the DEL button, set the option, insert your Windows 7 installation and restart computer.
– The black screen will appear (image 01).
– Press any key to boot from CD or DVD…. (by pressing the key you’re entering the setup)
– Select your language, time and currency and keyboard input (optionaly)
– Click install now
– Choose your edition (x86 is 32-bit, x64 is 64-bit) depending of CPU type you have.
*Choose x64 if you have 64-bit processor.
– Click “I accept”.
– Click “Custom (advanced).
– Choose your partition/hdd drive where Win7 should be installed and click format.
*You might get some error if you have two or more hard disks with different connectors (ATA and SATA).
If you get an error, turn off one of your hard disks and repeat the whole proces.
– After formatting, setup will continue automaticly and it will finish after 15-30 min.
– Next step would be username (Image 17).
– Type your password (if you want).
– When you get the screen for CD-KEY just ignore it leaving blank.
*Uncheck the box for automaticly activation and click next.
– Choose the third option for next step.
– Select your time zone.
– Select your current location (Home is recommended).
– The black CMD windows will appear. Wait a few seconds until computers restares once again.
– And that would be all about installation. You’re in Windows now.
Activation:
It’s not required, because it’s OEM. Windows will be premanently activated.
However, it’s well known that there is some problems with DELL and HP machines.
Important notes:
1-
Remember When Windows is finalizing Its Installation There Will Be A
Black Screen Appear (cmd) Prompt It will Stay Blinking for about 2 to 10
mins Depending on the system you are using Then It Will say
***-***-***-***-**** Key Installed Successfully Then It Will restart
Automatically. Then U can go to My computer`s Properties U Will See
Windows Is Activated.
2- DELL and HP machines, Use an Activator
or the crack supplied if anything. 80% the activators will work
meanwhile the other 20% depends on how old your Laptop/Computer, If you
did an Upgrade you’ll have to use an Activator regardless because this
Version was made for a fresh installation.
3- If you do not want
to be forced to use an activator I’d do a Custom install but you don’t
really have to format your driver due to the fact that Windows 7 will
just overwrite your current windows and put the old windows in a folder
called “Windows.old” where your previous windows installion files are
kept. And it’s optional if you choose to deleted the olf folder because
the drivers are “surpisingly” there after installation. Make sure you
are connected to the internet before and after the installion (meaning
that when your ready to set up your connection.Go for the fresh
Installation if you dont really have important programs you can easily
re-install at a later time.
4-Burn the ISO image at the lowest speed possible and Also your burning app. must verify the burn (the ISO)……
System Requirements & Info:
If you want to run Windows 7 on your PC, here’s what it takes:
*1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
*1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
*16 GB available hard disk space (32-bit) or 20 GB (64-bit)
*DirectX 9 graphics device with WDDM 1.0 or higher driver
Windows
7 is the easiest, fastest, and most engaging version of Windows yet.
Better ways to find and manage files, like Jump Lists and improved
taskbar previews, help you speed through everyday tasks. Faster and more
reliable performance means your PC just works the way you want it to.
And great features like HomeGroup and Windows Touch make new things
possible. Get to know Windows 7, and see how it can simplify just about
everything you do with your PC.
So if you have issues with pre-activation you’ll be forced to some activator to activate Windows 7.
[You must be registered and logged in to see this image.]
Windows 7 Seven Ultimate Fully Activated For Ever
Size: 3.47 GB
No serial and no activation needed
32/64-bit | Multi Languages | DVD ISO | Bootable | Activated
Install:
– Download and extract using WinRAR.
– Use NERO to burn the ISO image called “faXcooL.Windows.7.Ultimate.ENG.x86-x64.ACTiVATED”
– Burning speed should not be faster than 4x. Otherwise, it might not work.
– Restart your computer.
– Make sure you’ve seleceted your DVD-ROM/RW drive as a first boot device
* Enter the BIOS pressing the DEL button, set the option, insert your Windows 7 installation and restart computer.
– The black screen will appear (image 01).
– Press any key to boot from CD or DVD…. (by pressing the key you’re entering the setup)
– Select your language, time and currency and keyboard input (optionaly)
– Click install now
– Choose your edition (x86 is 32-bit, x64 is 64-bit) depending of CPU type you have.
*Choose x64 if you have 64-bit processor.
– Click “I accept”.
– Click “Custom (advanced).
– Choose your partition/hdd drive where Win7 should be installed and click format.
*You might get some error if you have two or more hard disks with different connectors (ATA and SATA).
If you get an error, turn off one of your hard disks and repeat the whole proces.
– After formatting, setup will continue automaticly and it will finish after 15-30 min.
– Next step would be username (Image 17).
– Type your password (if you want).
– When you get the screen for CD-KEY just ignore it leaving blank.
*Uncheck the box for automaticly activation and click next.
– Choose the third option for next step.
– Select your time zone.
– Select your current location (Home is recommended).
– The black CMD windows will appear. Wait a few seconds until computers restares once again.
– And that would be all about installation. You’re in Windows now.
Activation:
It’s not required, because it’s OEM. Windows will be premanently activated.
However, it’s well known that there is some problems with DELL and HP machines.
Important notes:
1-
Remember When Windows is finalizing Its Installation There Will Be A
Black Screen Appear (cmd) Prompt It will Stay Blinking for about 2 to 10
mins Depending on the system you are using Then It Will say
***-***-***-***-**** Key Installed Successfully Then It Will restart
Automatically. Then U can go to My computer`s Properties U Will See
Windows Is Activated.
2- DELL and HP machines, Use an Activator
or the crack supplied if anything. 80% the activators will work
meanwhile the other 20% depends on how old your Laptop/Computer, If you
did an Upgrade you’ll have to use an Activator regardless because this
Version was made for a fresh installation.
3- If you do not want
to be forced to use an activator I’d do a Custom install but you don’t
really have to format your driver due to the fact that Windows 7 will
just overwrite your current windows and put the old windows in a folder
called “Windows.old” where your previous windows installion files are
kept. And it’s optional if you choose to deleted the olf folder because
the drivers are “surpisingly” there after installation. Make sure you
are connected to the internet before and after the installion (meaning
that when your ready to set up your connection.Go for the fresh
Installation if you dont really have important programs you can easily
re-install at a later time.
4-Burn the ISO image at the lowest speed possible and Also your burning app. must verify the burn (the ISO)……
System Requirements & Info:
If you want to run Windows 7 on your PC, here’s what it takes:
*1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
*1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
*16 GB available hard disk space (32-bit) or 20 GB (64-bit)
*DirectX 9 graphics device with WDDM 1.0 or higher driver
Windows
7 is the easiest, fastest, and most engaging version of Windows yet.
Better ways to find and manage files, like Jump Lists and improved
taskbar previews, help you speed through everyday tasks. Faster and more
reliable performance means your PC just works the way you want it to.
And great features like HomeGroup and Windows Touch make new things
possible. Get to know Windows 7, and see how it can simplify just about
everything you do with your PC.
So if you have issues with pre-activation you’ll be forced to some activator to activate Windows 7.
|
adj1993- Administrator
- Join date : 2010-06-13
Age : 30
Location : India
Similar topics» MotionCam Security Camera Fully Working (JAVA)
» How to run older applications in Windows Vista
» Make use of your windows key
» Reinstall windows without losing anything
» Windows 7 Hidden Perks
» How to run older applications in Windows Vista
» Make use of your windows key
» Reinstall windows without losing anything
» Windows 7 Hidden Perks
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum